Your terrarium.
Fully automated.
Lighting, heating, foggers and rain pumps, automatically controlled by temperature and humidity. One hub, four sockets, wireless sensors and full control from your phone.
Terratronic C1 starter set
- C1 smart hub with 4 individually controlled sockets
- 3 jointly controlled USB ports, including 1x PD
- 1 wireless sensor (up to 4 per C1; extras €19 each)
- iOS and Android app included
- Remote control from anywhere
- Free shipping*
Non-binding email signup · No purchase or payment · Release: 1 December 2026
THE PROBLEM
Cable clutter? Not with us!
Replace overloaded power strips, plug-in timers and tangled cables. The Terratronic C1 combines everything in one tidy hub with safe, smart control.
HOW THE C1 CONTROLS YOUR TERRARIUM
Lighting, heating, rain pump and fogger
Assign lighting, heating, a rain pump or fogger, then create a schedule or temperature rule. No programming. No cable clutter.
Socket 1 → “Daylight” follows sunriseSocket 2 → “Heat mat” follows a temperature targetSocket 3 → “Rain pump” responds to humiditySocket 4 → “Fogger” runs at intervalsTHE HARDWARE
Every connection at a glance.
4 individually switched sockets
individually controlled in the app with internal fuse – power and energy are measured per socket
2 x USB Type-A
5 V / 0.5 A, jointly app-controlled for future accessories
1 x USB Type-C
5 V / 1 A, controlled with USB-A for phone charging and service
1.8 m cable
maximum total load of all sockets: 16 A
Wireless sensor interface
readings every 30 seconds, up to 4 sensors
THE SENSOR
Small, wireless and
packed with technology.
Thermometer and hygrometer in one. It measures temperature to 0.1 °C and sends every reading wirelessly to your C1. Mounted near the terrarium ceiling, its battery lasts a full year.
- Thermometer and hygrometer in one
- Accuracy: ±0.1 °C
- Wireless connection
- Battery life: 1 year
Additional wireless sensors are available. Connect up to 4 sensors in total to each C1 for different terrariums or climate zones.
ENERGY USE
Know exactly what your terrarium costs to run.
The C1 measures power and energy at every socket. Enter your electricity rate and the app shows the consumption of each socket and your estimated monthly cost live.
Illustrative calculation, not measured terrarium energy use.
SETUP
Setup has never been easier.
Create an account
Download the Terratronic app and create your free account in seconds.
Connect with Bluetooth
Hold your phone close to the C1 hub to pair it via Bluetooth, then enter your Wi-Fi password.
Control it from anywhere
Once the hub is online, control your terrarium from anywhere in the world.
Local control even without internet.
With internet access, you can control your terrarium remotely. If the internet goes down, local schedules and control continue while power is available. During a power outage the C1 cannot operate.
Waitlist and frequently asked questions
Sign up with your email, without obligation or payment. Release: 1 December 2026.
THE ROADMAP
What is coming in the future
The USB ports on the C1 are reserved for future expansions. We are also planning wireless gadgets that connect directly to the C1 and integrate into the app — all controlled in one place.
Planned for later · no release date yetTerrarium camera
Wireless inside the terrarium, so you can check live from anywhere that everything is fine.
Dedicated irrigation systems
Wireless misting and rain systems that talk directly to the C1.
Lights & lighting
App-controlled terrarium lights via wireless link, without their own socket.
More USB gadgets
The C1's reserved USB ports will gain new compatible devices.
APP PLANS
Free and Pro: what is planned
Pro features shown below are planned for a later release and are not available at launch.
Free
- Schedules
- Interval control
- Temperature control
- Humidity control
- Night setback
- Energy costs for up to 30 days
- Up to 4 sensors per C1
Everything at a glance
Waitlist, demo and FAQ — all buttons once more. Release: 1 December 2026.